Browsing by Author "Kamau, Geoffrey N"

Now showing 1 - 4 of 4

Adsorption and detection of some phenolic compounds by rice husk ash of Kenyan origin
(2002) Mbui, Damaris N; Shiundu, Paul M; Ndonye, Rachel M; Kamau, Geoffrey N
Rice husk ash (RHA) obtained from a rice mill in Kenya has been used as an inexpensive and effective adsorbent (and reagent) for the removal (and detection) of some phenolic compounds in water. The abundantly available rice mill waste was used in dual laboratory-scale batch experiments to evaluate its potential in: (i) the removal of phenol, 1,3-dihydroxybenzene (resorcinol) and 2-chlorophenol from water; and (ii) the detection of 1,2-dihydroxybenzene (pyrocatechol) and 1,2,3-trihydroxybenzene (pyrogallol) present in an aqueous medium. The studies were conducted using synthetic water with different initial concentrations of the phenolic compounds. The effects of different operating conditions (such as contact time, concentration of the phenolic compounds, adsorbent quantity, temperature, and pH) were assessed by evaluating the phenolic compound removal efficiency as well as the extent of their color formation reactions (where applicable). RHA exhibits reasonable adsorption capacity for the phenolic compounds and follows both Langmuir and Freundlich isotherm models. Adsorption capacities of 1.53 × 10−4, 8.07 × 10−5, and 1.63 × 10−6 mol g−1 were determined for phenol, resorcinol and 2-chlorophenol, respectively. Nearly 100% adsorption of the phenolic compounds was possible and this depended on the weight of RHA employed. For the detection experiments, pyrocatechol and pyrogallol present in water formed coloured complexes with RHA, with the rate of colour formation increasing with temperature, weight of RHA, concentration of the phenolic compounds and sonication. This study has proven that RHA is a useful agricultural waste product for the removal and detection of some phenolic compounds.
Air and blood lead levels in lead acid battery recycling and manufacturing plants in Kenya
(Taylor & Francis, 2012) Were, Faridah H; Kamau, Geoffrey N; Shiundu, Paul M; Wafula, Godfrey A; Moturi, Charles M
The concentration of airborne and blood lead (Pb) was assessed in a Pb acid battery recycling plant and in a Pb acid battery manufacturing plant in Kenya. In the recycling plant, full-shift area samples taken across 5 days in several production sections showed a mean value ± standard deviation (SD) of 427 ± 124 μg/m3, while area samples in the office area had a mean ± SD of 59.2 ± 22.7 μg/m3. In the battery manufacturing plant, full-shift area samples taken across 5 days in several production areas showed a mean value ± SD of 349 ± 107 μg/m3, while area samples in the office area had a mean ± SD of 55.2 ± 33.2 μg/m3. All these mean values exceed the U.S. Occupational Safety and Health Administration's permissible exposure limit of 50 μg/m3 as an 8-hr time-weighted average. In the battery recycling plant, production workers had a mean blood Pb level ± SD of 62.2 ± 12.7 μg/dL, and office workers had a mean blood Pb level ± SD of 43.4 ± 6.6 μg/dL. In the battery manufacturing plant, production workers had a mean blood Pb level ± SD of 59.5 ± 10.1 μg/dL, and office workers had a mean blood Pb level ± SD of 41.6 ± 7.4 μg/dL. All the measured blood Pb levels exceeded 30 μg/dL, which is the maximum blood Pb level recommended by the ACGIH®. Observations made in these facilities revealed numerous sources of Pb exposure due to inadequacies in engineering controls, work practices, respirator use, and personal hygiene
Lead Exposure and Blood Pressure among Workers in Diverse Industrial Plants in Kenya
(Taylor & Francis, 2014) Were, Faridah H; Moturia, M. Charles; Gottesfeld, P; Wafula, Godfrey A; Kamau, Geoffrey N; Shiundu, Paul M
The study evaluated airborne exposures and blood lead (BPb) levels in 233 production workers at six diverse industrial plants in Kenya. Blood and personal breathing zone air samples were collected and analyzed for lead (Pb) using atomic absorption spectroscopy. Blood pressure (BP) levels were measured using a standard mercury sphygmomanometer. The results indicated mean airborne Pb levels ± standard deviation (SD) as follows: 183.2 ± 53.6 μg/m3 in battery recycling, 133.5 ± 39.6 μg/m3 in battery manufacturing, 126.2 ± 39.9 μg/m3 in scrap metal welding, 76.3 ± 33.2 μg/m3 in paint manufacturing, 27.3 ± 12.1 μg/m3 in a leather manufacturing, and 5.5 ± 3.6 μg/m3 in a pharmaceutical plant. The mean airborne Pb levels exceeded the U.S. Occupational Safety and Health Administration (OSHA) 8-hr time-weighted average (TWA) permissible exposure limit (PEL) for Pb of 50 μg/m3 in the battery manufacturing, battery recycling, welding, and paint manufacturing plants. Similarly, mean BPb concentrations exceeded the American Conference of Governmental Industrial Hygienists (ACGIH®) biological exposure index (BEI) for Pb of 30 μg/dl. A significant positive association was observed between BPb and breathing zone air Pb (R2 = 0.73, P < 0.001). Approximately 30% of the production workers (N = 233) were in the hypertensive range with an average systolic and diastolic blood pressure (BP) of 134.7 ± 12.7 mmHg and 86.4 ± 8.9 mmHg, respectively. In the multivariate regression analysis, age, duration of work, airborne Pb and BPb levels were significantly associated (P < 0.05) with a change in BP. We recommend improved engineering controls, work practices, and personal hygiene to reduce Pb exposures. In addition, workers should undergo comprehensive medical surveillance to include BPb and BP testing, and airborne Pb assessments in all industries with significant lead exposures.
Thermal stability of Vernonia galamensis seed oil
(2000) Wamalwa, Benny M; Njuguna, Esther N; Shiundu, Paul M; Kamau, Geoffrey N
The physicochemical changes of refined vernonia oil?RVO (which naturally contains epoxidized triglycerides) upon heating was evaluated and is reported in this manuscript. A boiling point range of 183 °C to 190 °C (at 760 mm Hg) for the vernonia oil was obtained using the Siwolobboff's method. The oil changed its physical appearance and consistency in the course of the heating. A homogenous free?flowing beige?sand shade refined vernonia oil at room temperature (25 °C) was transformed irreversibly to an intense?brown shade, becoming increasingly more viscous with increase in temperature, and ceasing to flow momentarily at 188 °C. On cooling to room temperature, the oil solidified into a brown rubber?like elastic material. The oil also exhibited a reduction in its oxirane content from 1.39±0.004 equivalent HBr kg?l at 25 °C to 0.542±0.002 equivalent HBr kg?l at 70 °C. This signifies a 61% drop in oxirane content for the 45 °C temperature rise. These findings point towards a thermally driven polymerization and/or decomposition of the refined vernonia oil (RVO).