Were, Faridah HKamau, Geoffrey NShiundu, Paul MWafula, Godfrey AMoturi, Charles M2015-05-212015-05-212012Journal of Occupational and Environmental Hygiene Volume 9, Issue 5, 2012http://www.tandfonline.com/doi/abs/10.1080/15459624.2012.673458http://hdl.handle.net/123456789/1034The concentration of airborne and blood lead (Pb) was assessed in a Pb acid battery recycling plant and in a Pb acid battery manufacturing plant in Kenya. In the recycling plant, full-shift area samples taken across 5 days in several production sections showed a mean value ± standard deviation (SD) of 427 ± 124 μg/m3, while area samples in the office area had a mean ± SD of 59.2 ± 22.7 μg/m3. In the battery manufacturing plant, full-shift area samples taken across 5 days in several production areas showed a mean value ± SD of 349 ± 107 μg/m3, while area samples in the office area had a mean ± SD of 55.2 ± 33.2 μg/m3. All these mean values exceed the U.S. Occupational Safety and Health Administration's permissible exposure limit of 50 μg/m3 as an 8-hr time-weighted average. In the battery recycling plant, production workers had a mean blood Pb level ± SD of 62.2 ± 12.7 μg/dL, and office workers had a mean blood Pb level ± SD of 43.4 ± 6.6 μg/dL. In the battery manufacturing plant, production workers had a mean blood Pb level ± SD of 59.5 ± 10.1 μg/dL, and office workers had a mean blood Pb level ± SD of 41.6 ± 7.4 μg/dL. All the measured blood Pb levels exceeded 30 μg/dL, which is the maximum blood Pb level recommended by the ACGIH®. Observations made in these facilities revealed numerous sources of Pb exposure due to inadequacies in engineering controls, work practices, respirator use, and personal hygieneenAirborne leadBattery manufacturingBattery recyclingBlood lead levelArticle